79.213.247.111 am 17. September 2007 um 10:19 Uhr

2007-09-17T10:19:20Z

@@ Zeile 318: / Zeile 318: @@
+}
 </code=ini>
 Ist dies geschafft kann man testen ob der Server gestartet werden kann
@@ Zeile 328: / Zeile 331: @@
 Nachdem man diesen durchlaufen ist, ist der Server lauffähig und kann gestartet werden.
 Die Administration des Server findet über das Administrationstool von Kerio statt, welches von der Webseite zu beziehen ist.
 == Weiterführende Links ==

79.213.221.30: /* Weiterführende Links */

2007-09-15T15:25:20Z

Weiterführende Links

← Nächstältere Version		Version vom 15. September 2007, 15:25 Uhr
Zeile 334:		Zeile 334:

	[[Kategorie:Gentoo]]		[[Kategorie:Gentoo]]
	[[Kategorie:~~Tutorial~~ (Mailserver)]]		[[Kategorie:Tutorials (Mailserver)]]

79.213.221.30 am 15. September 2007 um 15:25 Uhr

2007-09-15T15:25:00Z

@@ Zeile 2: / Zeile 2: @@
   emerge -av rpm killproc
 <code=ini>
 # /etc/rc.status
@@ Zeile 317: / Zeile 318: @@
+}
 </code=ini>

79.213.221.30: Die Seite wurde neu angelegt: Da der Mailserver von Kerio nicht als ebuild für Gentoo vorhanden ist, müssen einige Programme von Hand installiert werden. Neben den [[...

2007-09-15T15:15:52Z

Die Seite wurde neu angelegt: Da der Mailserver von Kerio nicht als ebuild für Gentoo vorhanden ist, müssen einige Programme von Hand installiert werden. Neben den [[...

Neue Seite

Da der [[EMailserver | Mailserver]] von [[Kerio]] nicht als [[ebuild]] für [[Gentoo]] vorhanden ist, müssen einige Programme von Hand installiert werden. Neben den [[Paket]] für den [[rpm]]-[[Paketmanager]] muss auch das Programm '''killproc''' für die Befehle ''checkproc'' und ''startproc'' installieren werdenmüssen einige zusätzliche Pakete installiert werden.
emerge -av rpm killproc

<code=ini>
# /etc/rc.status
# vim: syntax=sh
# Definition of boot script return messages
#
# The bootscripts should use the variables rc_done and rc_failed to
# report whether they failed or succeeded. See /etc/init.d/skeleton for
# an example how the shell functions rc_status and rc_reset are used.
#
# These functions make use of the variables rc_done and rc_failed;
# rc_done_up and rc_failed_up are the same as rc_done and rc_failed
# but contain a terminal code to move up one line before the output
# of the actual string. (This is particularly useful when the script
# starts a daemon which produces user output with a newline character)
#
# The variable rc_reset is used by the master resource control script
# /etc/init.d/rc to turn off all attributes and switch to the standard
# character set.
#
# \033 ascii ESCape
# \033[<NUM>G move to column <NUM> (linux console, xterm, not vt100)
# \033[<NUM>C move <NUM> columns forward but only upto last column
# \033[<NUM>D move <NUM> columns backward but only upto first column
# \033[<NUM>A move <NUM> rows up
# \033[<NUM>B move <NUM> rows down
# \033[1m switch on bold
# \033[31m switch on red
# \033[32m switch on green
# \033[33m switch on yellow
# \033[m switch off color/bold
# \017 exit alternate mode (xterm, vt100, linux console)
# \033[10m exit alternate mode (linux console)
# \015 carriage return (without newline)
#

# Do _not_ be fooled by non POSIX locale
LC_ALL=POSIX
export LC_ALL

# Seek for terminal size and, if needed, set default size
if test -z "$LINES" -o -z "$COLUMNS" ; then
eval `exec 3<&1; stty size <&3 2>/dev/null | (read L C; \
echo LINES=${L:-24} COLUMNS=${C:-80})`
fi
test $LINES -eq 0 && LINES=24
test $COLUMNS -eq 0 && COLUMNS=80
export LINES COLUMNS

# Make sure we have /sbin and /usr/sbin in PATH
case ":$PATH:" in
*:/sbin:*)
;;
*)
PATH=/sbin:/usr/sbin:/usr/local/sbin:$PATH
export PATH
;;
esac

if test -t 1 -a "$TERM" != "raw" -a "$TERM" != "dumb" && stty size <&1 > /dev/null 2>&1 ; then
esc=`echo -en "\033"`
extd="${esc}[1m"
warn="${esc}[1;31m"
done="${esc}[1;32m"
attn="${esc}[1;33m"
norm=`echo -en "${esc}[m\017"`
stat=`echo -en "\015${esc}[${COLUMNS}C${esc}[10D"`

rc_done="${stat}${done}done${norm}"
rc_running="${stat}${done}running${norm}"
rc_failed="${stat}${warn}failed${norm}"
rc_missed="${stat}${warn}missing${norm}"
rc_skipped="${stat}${attn}skipped${norm}"
rc_dead="${stat}${warn}dead${norm}"
rc_unused="${stat}${extd}unused${norm}"
rc_unknown="${stat}${attn}unknown${norm}"
rc_done_up="${esc}[1A${rc_done}"
rc_failed_up="${esc}[1A${rc_failed}"
rc_reset="${norm}${esc}[?25h"
rc_save="${esc}7${esc}[?25l"
rc_restore="${esc}8${esc}[?25h"
function rc_cuu () { test $1 -eq 0 && return; echo -en "\033[${1}A"; }
function rc_cud () { test $1 -eq 0 && return; echo -en "\033[${1}B"; }
function rc_timer_on () {
# Draw seconds of running timout to column.
# Two arguments: timeout in seconds and offset
local n=$1
local c=$2
(trap "exit 0" TERM
while test $((n--)) -gt 0; do
sleep 1;
if test $n -gt 9 ; then
echo -en "\015${esc}[${c}C(${n}s) "
else
echo -en "\015${esc}[${c}C( ${n}s) "
fi
done) & _rc_timer_pid=$!
}
function rc_timer_off () {
if test -n "$_rc_timer_pid" ; then
kill -TERM $_rc_timer_pid > /dev/null 2>&1
fi
unset _rc_timer_pid
}
else
esc=""
extd=""
warn=""
done=""
attn=""
norm=""
stat=""

rc_done="..done"
rc_running="..running"
rc_failed="..failed"
rc_missed="..missing"
rc_skipped="..skipped"
rc_dead="..dead"
rc_unused="..unused"
rc_unknown="..unknown"
rc_done_up="${rc_done}"
rc_failed_up="${rc_failed}"
rc_reset=""
rc_save=""
rc_restore=""
function rc_cuu () { return; }
function rc_cud () { return; }
function rc_timer_on () { return; }
function rc_timer_off () { return; }
fi

_rc_service=${0##*/[SK][0-9][0-9]}
_rc_status=0
_rc_status_all=0
_rc_todo=$1
function rc_check ()
{
_rc_status_ret=$?
test $_rc_status_ret -eq 0 || _rc_status=$_rc_status_ret
test $_rc_status -eq 0 || _rc_status_all=$_rc_status
return $_rc_check_ret
}
function rc_reset ()
{
_rc_status=0
_rc_status_all=0
rc_check
return 0
}

if test "$_rc_todo" = "status" ; then
function rc_status ()
{
rc_check
_rc_status_ret=$_rc_status
local i
for i ; do
case "$i" in
-v|-v[1-9]|-v[1-9][0-9])
local vrt=""
local out=1
local opt="en"

test -n "${i#-v}" && vrt="$vrt${esc}[${i#-v}A" || opt="e"
case "$_rc_status" in
0) vrt="$vrt$rc_running"; ;; # service running
1) vrt="$vrt$rc_dead" ; out=2 ;; # service dead (but has pid file)
2) vrt="$vrt$rc_dead" ; out=2 ;; # service dead (but has lock file)
3) vrt="$vrt$rc_unused" ; ;; # service not running
4) vrt="$vrt$rc_unknown"; ;; # status is unknown
esac
echo -$opt "$rc_save$vrt$rc_restore" 1>&$out

# reset _rc_status to 0 after verbose case
_rc_status=0 ;;
-r) rc_reset ;;
-s) echo -e "$rc_skipped" ; rc_failed 3 ;;
-u) echo -e "$rc_unused" ; rc_failed 3 ;;
*) echo "rc_status: Usage: [-v[<num>] [-r]|-s|-u]" 1>&2 ; return 0 ;;
esac
done
return $_rc_status_ret
}
elif test -n "$_rc_todo" ; then
function rc_status ()
{
rc_check
test "$_rc_status" -gt 7 && rc_failed 1
_rc_status_ret=$_rc_status
case "$_rc_todo" in
stop)
# program is not running which
# is success if we stop service
test "$_rc_status" -eq 7 && rc_failed 0 ;;
esac
local i
for i ; do
case "$i" in
-v|-v[1-9]|-v[1-9][0-9])
local vrt=""
local out=1
local opt="en"

test -n "${i#-v}" && vrt="$vrt${esc}[${i#-v}A" || opt="e"
case "$_rc_status" in
0) vrt="$vrt$rc_done" ; ;; # success
1) vrt="$vrt$rc_failed" ; out=2 ;; # generic or unspecified error
2) vrt="$vrt$rc_failed" ; out=2 ;; # invalid or excess args
3) vrt="$vrt$rc_missed" ; out=2 ;; # unimplemented feature
4) vrt="$vrt$rc_failed" ; out=2 ;; # insufficient privilege
5) vrt="$vrt$rc_skipped"; out=2 ;; # program is not installed
6) vrt="$vrt$rc_unused" ; out=2 ;; # program is not configured
7) vrt="$vrt$rc_failed" ; out=2 ;; # program is not running
*) vrt="$vrt$rc_failed" ; out=2 ;; # unknown (maybe used in future)
esac
echo -$opt "$rc_save$vrt$rc_restore" 1>&$out

# reset _rc_status to 0 after verbose case
_rc_status=0 ;;
-r) rc_reset ;;
-s) echo -e "$rc_skipped" 1>&2 ; rc_failed 5 ;;
-u) echo -e "$rc_unused" 1>&2 ; rc_failed 6 ;;
*) echo "rc_status: Usage: [-v[<num>] [-r]|-s|-u]" 1>&2 ; return 0 ;;
esac
done
return $_rc_status_ret
}
else
function rc_status ()
{
rc_check
_rc_status_ret=$_rc_status
local i
for i ; do
case "$i" in
-v|-v[1-9]|-v[1-9][0-9])
local vrt=""
local out=1
local opt="en"

test -n "${i#-v}" && vrt="$vrt${esc}[${i#-v}A" || opt="e"
case "$_rc_status" in
0) vrt="$vrt$rc_done" ; ;; # success
*) vrt="$vrt$rc_failed"; out=2 ;; # failed
esac
echo -$opt "$rc_save$vrt$rc_restore" 1>&$out

# reset _rc_status to 0 after verbose case
_rc_status=0 ;;
-r) rc_reset ;;
-s) echo -e "$rc_skipped" ; return 0 ;;
-u) echo -e "$rc_unused" ; return 0 ;;
*) echo "rc_status: Usage: [-v[<num>] [-r]|-s|-u]" 1>&2 ; return 0 ;;
esac
done
return $_rc_status_ret
}
fi

function rc_failed ()
{
rc_reset
case "$1" in
[0-7]) _rc_status=$1 ;;
"") _rc_status=1
esac
rc_check
return $_rc_status
}

function rc_exit ()
{
exit $_rc_status_all
}

function rc_confirm()
{
local timeout="30"
local answer=""
local ret=0

case "$1" in
-t) timeout=$2; shift 2 ;;
esac
local message="$@, (Y)es/(N)o/(C)ontinue? [y] "
: ${REDIRECT:=/dev/tty}

while true ; do
read -t ${timeout} -n 1 -p "${message}" answer < $REDIRECT > $REDIRECT 2>&1
case "$answer" in
[yY]|"") ret=0; break ;;
[nN]) ret=1; break ;;
[cC]) ret=2; break ;;
*) echo; continue
esac
done
echo
return $ret
}

function rc_active ()
{
local x
for x in /etc/init.d/*.d/S[0-9][0-9]${1} ; do
test -e $x || break
return 0
done
return 1
}

function rc_splash()
{
return 0
}
</code=ini>

Kerio Mailserver (Gentoo) - Versionsgeschichte

79.213.247.111 am 17. September 2007 um 10:19 Uhr

79.213.221.30: /* Weiterführende Links */

79.213.221.30 am 15. September 2007 um 15:25 Uhr

79.213.221.30: Die Seite wurde neu angelegt: Da der Mailserver von Kerio nicht als ebuild für Gentoo vorhanden ist, müssen einige Programme von Hand installiert werden. Neben den [[...